The exterior surface is first cleaned properly; the surface must be clean and dry for Class Mate Water Repellent Spray. Shoe deodorant is applied inside the shoe. These three products are not a mixture to be sprayed consecutively on the same surface. It is clearer to plan the care routine according to the application area rather than the product names.
Identify the application areas before you start
Check the packaging to see which materials the cleaner and protector can be used on. The exterior, lining, and sole of the shoe may not be made of the same material. Do not automatically apply a product suitable for one area to the other areas. Test it first on a small, inconspicuous area.
Read the shoe's own care instructions as well. If the manufacturer recommends a specific cleaner or care method, follow this information. A general online guide is not a substitute for instructions specific to your shoe material.
1. Exterior surface cleaning
When using Shoe Cleaning Foam with Brush 150 ml, follow the packaging instructions for the amount, application, and residue removal. The presence of a brush head does not mean all surfaces can be treated with the same pressure. Check material compatibility, especially on delicate surfaces.
Do not assume whether rinsing is necessary or how long the foam should be left on based on another product's video. The correct method depends on the formula you use and the shoe care information. If there is a step not explained on the product, contact the brand for information before applying it.
2. Check dryness before applying the protector
After cleaning is complete, make sure the surface is dry before applying Class Mate Water Repellent Spray. Follow the shoe manufacturer's drying recommendations; do not use direct heat to shorten the drying time. GORE-TEX's shoe care guide also recommends air drying and avoiding direct heat for its products.
3. Water repellent treatment for the exterior surface
Water Repellent Spray 200 ml is applied to a clean, dry surface from a distance of 20 cm; then wait 25–30 minutes. This time and distance are not applicable to the foam or deodorant. For detailed preparation, see the water repellent spray usage guide.
Shoe deodorant is a separate step
Shoe Deodorant 100 ml is applied inside the shoe. Follow its own label for the application amount and waiting time before wearing the shoes again. Do not use the 20 cm distance for the exterior surface protector as the deodorant instructions.
Do not use deodorant as a cleaner. Shoe interior and exterior care have different requirements; there is no need to mix the products or apply them repeatedly to the same spot. Pay attention to ventilation during steps involving spray products, and read the safety warnings for each product separately.
Frequently asked questions
Should I use deodorant or water repellent spray first?
They are applied to different areas. After cleaning the exterior and checking that it is dry, apply water repellent treatment; deodorant is applied inside the shoe according to its own label.
Should the foam be rinsed?
Follow the instructions on the packaging of the product you use. No rinsing method or waiting time is recommended for Class Mate foam without verified detailed instructions.
Should I also wait 25–30 minutes for the deodorant?
This time is specified for the water repellent spray. The waiting time for the deodorant should be checked on its own label.
Sources and scope
Class Mate usage information is based on the product instructions provided by the brand. General care resources should not be interpreted as application times or compatibility guarantees for different products.
